Introduction
Troublemaker 3D Printer is affordable open source open hardware 3D Printer, with build volume 300 x 300 x 300 mm.
About Troublemaker 3D Printer
EFFECTIVELY OPEN
Made with widely available parts, the enclosure can be laser or cnc cut.
IMPROVED DESIGN
Improved Version of highly popular open-source 3D printer Ultimaker Original - fully enclosed with enclosure design allowing for easy heated chamber upgrade and enlarged build volume to 300 mm x 300 mm x 300 mm.
DIY FRIENDLY
Complete kit of assembly parts available together with CAD files, technical documentation and step-by-step assembly instructions. Easy to build, upgrade or fix.
OPEN-SOURCE AND OPEN-HARDWARE
Published under open-source open-hardware licenses. You can share or modify it for any purpose, even commercially.
Specifications
Specifications
Troublemaker v2 | |
Base price | 990 EUR for full KIT (available from Fabrikor) |
Printing Specifications | |
Build volume (mm) | 300 X 300 X 300 |
Auto levelling | Optional |
Minimal layer height (mm) | 0.05 |
Steps/mm (X & Y) | 80 |
HotEnd | 1 X E3D-V6 1.75 mm (swappable with any E3D) |
Travel speed (mm/s) | 200 |
Print speed (mm/s) | 150 |
Heated bed | Yes - 24V or 230V |
Mechanical Specifications | |
Desktop size (mm) | 460 X 440 X 660 |
Frame | Plywood |
Linear rails | 8 mm ground hardened steel |
Electrical Specifications | |
Supply Voltage (V AC) | 240 or 110 |
Supply connection | Switched and fused IEC Socket. Lead not provided. |
Power supply | 1 X 24V 100W 1 X 24V 350W (if 24V bed) |
Electronics control board | RUMBA + LCD |
Motor drivers | 4 X DRV8825 (X,Y,Z,E) |
Motors | X: 46 Ncm 1.8° Y: 46 Ncm 1.8° Z: 46 Ncm 1.8° |
Software Specifications | |
Recommended slicing software | CURA Slic3r |
Build Time | |
From full-kit | 12h |
Updated over 7 years ago